Extreme Drums triggers are quick and easy to install. All you need is a screw driver and a drum key. You simply take the top head off your drum and loosen the screws of one of the lugs. We even provide additional screws for you to use if needed.

Next you slide the trigger bracket under the screws, align the top of the trigger to contact the drum head, and tighten the lug screws back down to hold the trigger in place.

Then you feed a small cable through the drum's vent hole, plug it into the trigger and attach the other end of the cable with it's 1/4" jack on the outside of the drum by attaching it to a tension rod of the bottom head.

Last, you put a quiet mesh drum head on top of the drum and tighten it as desired. Now you have an acoustic-2-electronic drum conversion, made possible with our extremely sensitive triggers that will make your drum outperform any other e-drum. And you did it with your own drum at a fraction of the cost of buying any other e-drum.

It's that easy to install an Extreme Drums trigger in your drum. And converting your entire drum set is a breeze with a set of Extreme Drums triggers.

Our triggers come with easy to follow installation instructions with lots of pictures to make your installation process quick and easy.  We also give you suggestions for dialing in the best settings for the drum module that you will be using with your converted drums.

And if you have any questions or problems we are just a phone call away.

Keep watching for new videos we will be posting soon with step-by-step installation tips.